Keith Black KB115.040 Hypereutectic 289/302 Ford Pistons 9.0 C/R

Description

Keith Black Hypereutectic pistons are T-6 heat treated and offer reduced scuffing and improved durability over stock replacement pistons. They also allow you to run tighter clearances because of reduced thermal expansion, which means more race winning power.
390 Hypereutectic alloy. Fully machined crowns and valve reliefs. Drilled oil drain backs. Full floating wrist pins. Triple wound spiral locks. Reflective alloy allows 2% power increase. Quench dome technology minimizes deterioration. Zero deck quench designs.
For Ford 302 c.i. (4.00" bore x 3.00" stroke). Use piston ring Style A (5/64", 5/64", 3/16").
Ring Style Chart (GIF)
Item DetailsC/R 64cc: 9.0, C/R 69cc: 8.5
Bore and Stroke: 4.00" x 3.00"
Rod Length: 5.09" Ring Style: A
Keith Black KB115.040 Hypereutectic 289/302 Ford Pistons 9.0 C/R
Sku # 474115-040
Mfr. Part # KB115.040
Condition
New
Brand
Keith Black
Sold
Set
Details
Info
Keith Black Hypereutectic pistons are T-6 heat treated and offer reduced scuffing and improved durability over stock replacement pistons. They also allow you to run tighter clearances because of reduced thermal expansion, which means more race winning power.
390 Hypereutectic alloy
Fully machined crowns and valve reliefs
Drilled oil drain backs
Full floating wrist pins
Triple wound spiral locks
Reflective alloy allows 2% power increase
Quench dome technology minimizes deterioration
Zero deck quench designs
For Ford 302 c.i. (4.00" bore x 3.00" stroke). Use piston ring
Style A
(5/64", 5/64", 3/16").
Ring Style Chart (GIF)
Item Details
C/R 64cc: 9.0, C/R 69cc: 8.5
Bore and Stroke: 4.00" x 3.00"
Rod Length: 5.09" Ring Style: A
Specs
Pin Diameter:  .912"
Charts
(PDF)
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Set
Piston Ring Style
A
Connecting Rod Length
5.090"
Piston Material
Hypereutectic Aluminum
Piston Style
Flat Top w/ 2 valve reliefs
Compression 64cc =
9.0 : 1
Piston Diameter
4.040
Stroke
3.000
Piston Weight
570
Wrist Pin Weight
143
MFG. Part #
KB115.040
GTIN Code
800745042835
Wrist Pin Diameter
0.9120
Reviews
Would buy it again
Rated
by Diamond miner on October 22, 2019
Summary:
Works great good quality
Yes, I recommend this product.
Related Items / Suggested Parts
Icon IC719.040 Forged SBF Ford 302 Flat Top Pistons .040 Over
KB Ford 302 Hypereutectic Pistons, .200 Dome, 5.09 Rod
4 Bore SBC Gas Proven A Piston Rings .040 Over Bore-Small Block Chevy
Total Seal Claimer Chevy 350 Style A Piston Rings .040 Oversize-Racing
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.