Eastwood B20 Benchtop Electric Powered Air Sandblasting Blue Blast Media Cabinet

Description

An affordable way to media blast parts without taking up much room in your shop
An affordable way to media blast at home
Space efficient benchtop design
Durable powder coated cabinet
Holds up to 25 lbs of blast media
Holds up to 55 lbs of parts
High-quality gun with replaceable tips
Needs just 7cfm @ 90psi
19in x 15in window lens
Full window-sized tear-offs
Fits in just 24in x 20in space
The smart, space-efficient design of this benchtop media blasting cabinet really can't be beaten. The whole hinged top of the cabinet is both the access door and the view window. This gives you much greater access to the inside than even some full-sized cabinets. Meanwhile, you look down at your work through a big 19-inch x 15-inch screen, with full-sized tear-off protection (5pk #30770). Dust control is handled by hooking up any shop vacuum to the cabinet or use it in a well-ventilated area with no vacuum. The whole cabinet will take up just a 24-inch x 20-inch space in the corner of your workbench. That means you have nearly 3 cubic feet of workspace to blast in. Just about any shop compressor can run it too; it needs just 7 cubic feet per minute at 90 pounds per square inch. The included high-quality gun will work with a variety of media and has replaceable ends for years of usage. Use with 60 grit or finer blast media.
The use of walnut shell media is not recommended.
Electrical current requirement (lamp):
120 Volt AC, 60hz
Air supply requirements:
7 CFM @ 90 PSI
Internal Dimensions:
22 wide x 18 deep x 12 high
Home Media Blasting Solution - Remove Rust with Benchtop Blast Cabinet from Eastwood - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]