360 Rotary Backpack Hat Mounts Clip Fast Clamp Mount for GoPro Hero 2 3 3+ 4

Description

Free & Fast Shipping from Real US Warehouse
Featured Item
Description
- Brand new
- LED power indicator
- Module is easy to use, very intuitive
- Button to switch measurement of the input or output voltage, and LED indicates the current
measurement of the input or output voltage
- The voltmeter can be turned off by another button
- Module using 12A one piece of high quality inductor, input current can be reached at   7A, similar
products on the market are used in ordinary 5A inductor, performance parameters vacuity, so you
must pay attention
- Special precision voltmeter can also be manually calibrated
Performance parameters
-Input voltage range: 3-35VDC(Note: the input voltage is less than 4V, voltmeter  failure)
-Input current: 7A
-Output voltage range: 3.5-35VDC(please to ensure that output voltage above on  input voltage)
-Output current: 6A (max)
-Output power: 75W (when the input and output voltages greater than 16V up to  100W)
-Conversion efficiency: 96% (max)
-Voltmeter range: 4 to 40V, error +-0.1V
-Short circuit protection: yes(limit current 14A). (Note: connected to high-power load,  just switched on the impact of current very general meeting current limiting self- locking protection, it is recommended to be switched on firstly, and then access the  load).
-Input reverse polarity protection: None (if required, high current diode in series with  the input)
-Size:L*W*H = 67*42*16mm
-Weight:38g
Application:
- DIY a regulated power supply, 5V input can be output 5-35V adjustable
- The power supply for your electronic equipment. For example, 3.7V lithium boost to  5V for mobile power; 7.4V or 12V boost to the laptop power supply to 19V
-As the vehicle power supply for your laptop, PDA or a variety of digital products  supply
-Voltmeter manual calibration method
-If you feel voltmeter accuracy to meet the requirements, you do not need to perform  the following operations
-(1) Output voltage calibration steps
-Step 1, adjust the right button so that “OUT” LED lighted, the voltmeter shows the  value of output voltage; Press the right button for more than 2 seconds, release,  voltmeter and “OUT” LED flashes in synchronization so that you enter the output  voltage calibration mode.
-Step 2, press the right button (normal speed), the voltage value is adding up a unit;  Press the left button, minus a unit; Due to a unit is less than 0.1V, the minimum  voltage display to 0.1V, so you need to continuously press 1-5 times to see the  voltmeter change 0.1V, how many times voltmeter change 0.1V by pressing the key,  depending on the current display voltage, the higher the voltage, the fewer the  number of press
-Step 3, press the right button for more than 2 seconds, release, to exit the output  voltage calibration mode. All parameters set to automatically power down to save
-(2) Input voltage calibration steps
-Step 1, adjust the right button so that “IN” LED lighted, the voltmeter shows the value  of input voltage; press the right button for more than 2 seconds, release, voltmeter  and “IN” LED flashes in synchronization so that you enter the input voltage calibration  mode
-Steps 2 and 3, consistent with the output voltage calibration method
Included in this package
- 1 x 360 Rotating Clip
- 1 x Thumb Screw
Shipping & Payment
Payment
-
We require
Paypal
payment only.
- Your order will be cancelled if the payment is not received in one week.
We offer Fast US Shipping /
Not Ecomomy
/
Never China
- There is a big difference between US Shipping and shipment made from foreign countries
- There are some sellers who place orders from China after receiving US orders
- If you order your urgent part from these sellers, you would have to wait a month to get it
- Our orders are shipped daily from Georgia USA warehouse
- You can be confident that you will get your item promptly if you place an order with us
- Free Tracking number is provided so you can check for yourself where your item is
- Many years of experience to provide the fastest deliver solution for our valued customers
- Please place an order with us. You will be pleasantly surprised by our service
Shipping
- Delivery area: We are only shipping within 48 continental United States.
-
Delivery method: USPS Priority & USPS First Class. Choose Priority for fast delivery.
- Handling time: 1 business day after receiving payment. If USPS is open, we are open too.
- All our items are shipped with the tracking number.
- Buyers are responsible to provide us with the correct address. Please confirm your address.
Handling And Return
- We accept return within 14 days after delivery.
- Defective items will be exchanged or fully refunded on buyers request.
- 15% restocking fee will be charged on non defective items.
- All items need to be returned in original package with all the supplies.
- Shipping and handling fees are non-refundable under any circumstances.
- Our goal is 100% customer satisfaction.
- Got a problem? No Problem.
Contact us by eBay message system.
- We will reply promptly during business hours.
Customer Support
- Please do not open a case or leave us a bad feedback. This can only delay our service.
- Mon~Fri: 9AM to 5PM | Sa:t 9AM to 12PM | Sun: Closed (Eastern Standard Time)
- If you are happy with your purchase, please leave us a 5 star feedback. Thank you.
Copyright 2018
Designed and Maintained by miniduino an eBay Store