(1) Evans Power Sport Waterless Coolant 64oz & (1) Evans Prep Fluid 1USG

Description

( For Canadian customer, please visit www.evanscooling.ca )
Evans Coolant
PSP Powersports Coolant MX Bikes, Trail Bikes, Enduro Bikes, Street Bikes,Quad ATV,UTV's & Snowmobile
.
Evans Powersports Coolant offers improved performance and reliability. Even under extreme conditions, Evans Powersports Coolant will not overheat. Using Evans Coolant allows the engine to be safely tuned for more power. A higher compression ratio, leaner mixture, and more advanced spark are some of the options available to the engine builder. Evans Powersports Coolant provides permanent cooling protection for the life of the engine so replacement is never necessary. Its superior corrosion protection is not degraded over time and it won't freeze or damage engine components.
Currently formulated for use in all gasoline internal combustion engines, provides year-around protection and the best heat transfer characteristics.
All Evans waterless coolants are compatible - therefore for applications previously installed with either NPG, NPG+ or RACE all can safely be topped off w
Powersports Coolant are engineered to provide superior cooling performance and engine protection.
Eliminate cooling failures caused by water.
Evans Waterless Coolant’s high boiling point eliminates pump impeller cavitation.  It remains a liquid under conditions where water would boil.
The absence of water from the cooling system eliminates the cause of corrosion,  Evans Waterless Coolants are safe for use with all metals.
No electrolysis.  Evans Waterless Coolants are non-conductive.
Maximize boil-over protection
Evans Waterless Coolants boil at 375°F,  Evans Coolants won’t boil over in hot weather, heavy loads, high altitude, or high power output.
Evans Waterless Coolants instantly condense back to liquid state, providing constant liquid to metal contact, keeping metal temperatures under control.
Boils 375F @0psi
Freezes -40F
Provide lifetime cooling performance and engine protection.
Evans Coolants are non-corrosive with stable additives, no need to change the coolant or replace additives.
Cooling effectiveness and corrosion protection continue for the life of the engine.  Traditional water-based antifreeze must be flushed and changed at regular intervals.
Reduced operating pressure eliminates stress and protects engine cooling components, hoses, and gaskets.   Cavitation erosion and electrolysis are also eliminated.
The additives in Evans Waterless Coolants are stable.
Safer for handling and the environment.
Evans Waterless Coolants are essentially non-toxic.
Evans is safer to handle during installation and engine maintenance.
Lifetime coolant helps preserve natural resources and reduce hazardous waste.
Evans Prep Fluid
Evans Prep Fluid is a waterless cooling system flush designed to seek out remaining water after draining the cooling system of an engine. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. A minimum of 1/2 gallon of Prep Fluid is recommended for all motorcycles converting to PSP, HP or NPG. Prep Fluidis NOT intended to be a stand-alone operating coolant, but as a flush only.
+Please read carefully before Purchasing+
All items are new and in factory packaging unless otherwise noted in the description.
You can reach us at: (450)449-4442 or by email at the 'Ask a Question' link at the top of the page. We're open Monday thru Friday, 10am-5pm Eastern Standard Time. Please drop us a line if you have any questions before purchasing.
Payment
We accept the following forms of payment.
PayPal
Visa
MasterCard
Discover
American Express